Pages

Sunday, November 11, 2012

DIY "Wooden" Office Chair Mat

After finishing the Chrome & Leather Desk for my Husband's Office, I realized that his rolling office chair was not the best thing for our new carpet.  So, I went to look for a basic Chair Mat.  I needed a fairly large one - at least 4' x 4' and I was shocked at the prices of even the cheap plastic mats.  Even more shocking were some of the fancy wooden mats like this one at Staples.com for $289.00!

Anji Mountain Tri-Fold Bamboo Chairmats, Dark Cherry
Anji Mountain Chairmat - Staples 
But, when I saw the wooden ones, I got an idea.  Here's what I did:


I ran out to Home Depot and picked up this 4' x 4' piece of plywood floor underlayment for $12.00. 


Then, I picked up 16 of these wood-look self-stick flooring tiles at $0.98 each.  I stuck them onto the plywood and here's the result:


Plus, it probably took me a total of 10 minutes to complete this project and my husband was thrilled with his new, expensive-looking Chair Mat!


The possibilities are endless if you think about how many different styles of self-stick flooring tiles there are out there! You could have a marble or granite-look mat, or any style of wood or cork.    

The Fake-It Yourself Breakdown:

Fake Expensive Wood Chair Mat  (Plywood $12, 16 Tiles @ $0.98 ea)

Total Fake-It Cost:  $27.68

Compare to the Fancy Chair Mat from Staples:  $298.00

Total Fake-It Savings:  $270.32

77 comments:

  1. Replies
    1. woodprix has the best handbooks and ready instructions. You can learn much from them and make it yourself. http://woodprix.com

      Delete
  2. Your mat looks better than the Staples mat! Awesome!

    ReplyDelete
  3. That's the best idea I've seen! What a savings and looks so good. Job well done, m'dear.

    ReplyDelete
  4. VERY clever! Love all the ideas you plant in my brain. =) Looks awesome!

    ReplyDelete
  5. How thick was the plywood you used?

    ReplyDelete
  6. Wow! Nice chairmat! It's a good thing that you've bought your husband mat that he can use for his rolling chair. With this, he can work comfortably in his office without worrying that he may damage the floor.

    ReplyDelete
  7. Love it, its a win-win for me! This would make a great Christmas present for my husband, and it would add a little something to the look of the office. Thanks for sharing!

    ReplyDelete
  8. I did this today. At Home Depot, they cut it smaller to 4x3 for me for free. The wood subflooring piece was $8.00, and I also used the tiles pictured in the example. Those were $0.89 cents each. I used 12 of them. It came out perfectly and I couldn't be happier. Thanks for this awesome money saving tip!

    ReplyDelete
  9. Thank you for this great money saving project! I actually doubled the underlayment by gluing two pieces together because our carpet is a little thicker, my husband is a big guy, and he works from home and sits at his desk for many hours every day. It looks great and he loves his new mat! I put a link to this on my homemaking blog today. I hope you don't mind.

    ReplyDelete
  10. This is awesome! I guess my only concern is that it could scratch/slide around on a hardwood floor. Any thoughts on this?

    ReplyDelete
  11. I'd be concerned about the plywood fibers eventually working their way into the carpeting over time. (This was mentioned on another web discussion about chair mat alternatives--the warning was against using plywood.) However, I think a solution for that, and possibly the scratching/sliding issue, would be to adhere the vinyl tiles to both sides....or to affix one of those rubbery sheets you put under throw rugs to the bottom of the plywood.

    ReplyDelete
  12. I just made this today. I was able to find a 3x4 piece of plywood at the local ReStore for $3.00 and the same tiles that you used at HD. I love it and it works great. Thank you!

    ReplyDelete
  13. What a cool idea!! You are vary creative.

    ReplyDelete
  14. fantastic idea! Looks good.keep it up.Princess Car Beds

    ReplyDelete
  15. Has it continued to work well for your husband? Any problems, or things you would change now, after using it for several months?

    ReplyDelete
  16. My floors actually have these tiles so this mat will blend seamlessly into the floor - genius!

    ReplyDelete
  17. You inspired me to do this. Two problems: I needed it about 1 inch narrower to fit between two desk legs. I'm kind of a perfectionist - the vinyl can't go over the edge or fall short of covering the wood.

    I went with 3' lengths of the vinyl wood to create an interesting border pattern. Then 4 1' squares in the center. I like it.

    https://lh4.googleusercontent.com/-6jvi34ZwGws/Urngtfa826I/AAAAAAAAA30/O0FNltfyg80/w705-h529-no/IMG_20131223_183345.jpg

    I had to trim the edges. The vinyl apparently has metal in it, as I got sparks with my circular saw and a dull blade. A rough blade will go through the wood and mat fine, but chip the vinyl. A fine blade will go dull quickly and get bogged down. I spent 2.5 hours with the saw, two blades, and a small belt sander... but it was worth it.

    ReplyDelete
    Replies
    1. When I say "metal in it" I mean trace amounts... just enough to see a spark every few seconds. Nothing like a grinder on steel or anything. :)

      Delete
  18. I just made this as well. Easy, creative and cost saving. I did have to tie the 4'x4' to the roof of my carr to get it home, a bit of a challenge on a windy Rochester afternoon!

    ReplyDelete
  19. AWESOME!!!! I could not stand the expensive plastic chairmat I got from Staples last week, and need something the wheels won't sink into — and when I googled' "chairmat alternative" I came across this blog post.

    AWESOME AWESOME AWESOME

    ReplyDelete
  20. Absolutely Awesome!!!!
    I have a big area to cover and the 72×96 mats were over 450.00. I have the extra room and decided to use 2 4×8 sheets of the medium thickness hardboard,( it looks like cardboard, but 3/16 thick) the flat surface on one side is great for the tile to stick to and the rougher side works great to grab the carpet to keep it from sliding.
    Then I got 2 boxes of the cheapest peel-&-stick tiles.

    2 hardboards 14.12×2=28.24,
    2 boxes of tiles 17.55×2=35.10
    Total with tax 67.14
    for a 96×96 mat.(no clue what a custom cut mat that size would be, but i’d guess at least 600-700.00) crazy!

    Oh, just because I was concerned about the center line where I butt the 2 boards together having the chair catch the edge, I laid a piece of Gorilla Tape under the board on the seam to keep the seam even. Got the idea from carpet layers and carpet tape. Plus when it comes time to take it up, all i need do is pull the tape off and have 2 4×8 sheets to move instead of 1 big one.

    Thanks again!!

    ReplyDelete
  21. Awesome, going to try this to protect my hardwood floors. Was anybody else concerned about the plywood scratching the floor underneath and have any suggestions?

    ReplyDelete
    Replies
    1. I haven't tried it, but how I would fix that problem is to padding underneath--I'll probably try to see if cheap carpet would work or not.

      Delete
  22. Excellent tips. Really useful stuff. Never had an idea about this, will look for more of such informative posts from your side. Good job Keep it up.
    Discount Computer Office Chairs

    ReplyDelete
  23. Wow, awesome idea!
    I just made one myself using your post, only spending $20 at Home Depot for 16 of the "wood" vinyl tiles (slightly different than yours) and a 4' x 4' 5-mm underlayment piece (didn't want it too thick). I used a power sander on the edges to lessen any splintering from the edges before placing the tiles. Came out great - Thanks!!

    ReplyDelete
  24. This comment has been removed by the author.

    ReplyDelete
  25. Excellent tips.: I needed it about 1 inch narrower to fit between two desk legs.

    chair floor protector

    ReplyDelete
  26. Thank you! I just found this post this morning, and two hours later, I have a similar mat under my desk. I paid $11:58 for an 8' X 4' sheet of underlayment, and they ripped it in half for me. They even rough cut a 1' square out of each corner on one side, so I have a 1'X2' lip that goes under the desk and 3' by 4' in front of the desk. I got the same .89 sticky tiles (14 of them) and it looks great. I've never had such an easy project that looks and works so great.

    ReplyDelete
  27. Absolutely fantastic tips! It looks very creative and eye-catching. Thanks for sharing some innovative ideas about wooden office chair.

    ReplyDelete
  28. This comment has been removed by the author.

    ReplyDelete
  29. Ive been wanting a chairmat for a while. Every time I go to an office supply store, I balk at the price of them. Its not that I cant afford it, but I just feel the markup is way to high to justify. I even went to a used office supply outlet near me. The outlet always has used chairmats dirt cheap, but they are always dirty, discolored, scratched or cracked. The salesman said the good ones go instantly.

    Then I came across this article... I said why not? I went to Home Depot and bough a 4'x4' 5.5MM Triply. They didnt have 3x3, which is what I wanted, but they cut it for me for free. That was $8.47. The cuts werent perfect, there were some burrs on one side of two edges, but I just put the tiles over those edges. The tiles themselves, were $7.83 for 9. The loose tiles on display were not in the best condition, so the salesman opened a box of them and gave me 9. They sell them loose or by the box. Not sure how many are in the box, but it was heavy, so there were probably a lot. Total cost with tax was $17.28.

    Construction took less than a minute. Peel and place.

    ReplyDelete
    Replies
    1. So after using my spiffy new chairmat for a bit, I felt the plywood on the bottom was flexing a bit too much. I was worried that over an extended period of time the plywood might crack under the weight. I went back to Home Depot and purchased 9 more tiles of a different pattern. I could have used the same tiles, but I thought it might be nice to turn it over once in a while and get a new look. The extra tiles made the mat much more rigid, with just a little flex.

      Delete
    2. How is your plywood mat with tiles on both sides holding up after a year? I am thinking about doing this myself.

      Delete
  30. Great tip. Just finished mine. So far so good.

    ReplyDelete
  31. Wow, this is a great alternative! I cant believe how much stores charge for a flat piece of plastic.

    Thanks for posting this!

    ReplyDelete
  32. Great project! I made two of them today for the house and they turned out wonderfully. Thanks for posting it.

    ReplyDelete
  33. I was just curious to hear any feedback from anyone who has made this and used it for a while (a year or longer). I worked out of a mobile office once that had tile flooring and the wheels on the office chair really did a number on the tile, breaking it up. I'm curious how this setup would hold up long term by those that use their office every day rolling around on it. Thanks in advance!

    ReplyDelete
  34. Wow Nice Fabrication wooden chair meat blog post, Thanks for sharing this interesting and very informative content. Always keep sharing.

    Online Metals Shop
    Z-Channel Metal

    ReplyDelete
  35. This comment has been removed by the author.

    ReplyDelete
  36. This comment has been removed by the author.

    ReplyDelete
  37. Thanks for the great idea. Put mine together yesterday and today. Took me a little longer because I sanded the edges and a few other rough spots. I then put one coat of polyurethane on both sides. Put my "Moroccan slate" tiles on today. Looks great. Hopefully it lasts.

    ReplyDelete
  38. I love this and made one too. I'm just curious as to what would ya'll recommend for the sharp edges.. I can't think of anything to put over it other than a rubber edging of some sort but can't think what would be good. Can you give some suggestions?

    ReplyDelete
  39. I love this and made one too. I'm just curious as to what would ya'll recommend for the sharp edges.. I can't think of anything to put over it other than a rubber edging of some sort but can't think what would be good. Can you give some suggestions?

    ReplyDelete
  40. Woodworking guide offers anyone of any skill level the ability to build amazing projects. The guide is extra helpful because it offers more detailed explanations, videos and blueprints then your typical woodworker magazine.
    Download 16,000 Woodworking Plans & Projects
    https://woodworkingplanst.blogspot.com

    Arbor Projects ,
    Adirondack Chairs ,
    Artwork Display ,
    Bathroom Unit ,
    Box Designs ,
    Billiard/Pool Table ,
    Barn Plans ,
    Bed Plans ,
    Bedside Cabinets ,
    Bee Hive Plans ,
    Bench Projects ,
    Bird Feeders ,
    Birdhouse Plans ,
    Boat Plans ,
    Book Case Plans ,
    Baby Changing Table ,
    Coat Rack ,
    Cabin Plans ,
    Cabinet Plans ,
    Carport Plans ,
    Cart Plans ,
    Cat House Plans ,
    CD/DVD Holder ,
    Cellar Projects ,
    Chair Plans ,
    Chest Designs ,
    Chicken Houses
    Childrens Room Plans ,
    Clock Plans ,
    Coasters ,
    Coffee Table Designs ,
    Cold Frame Plans ,
    Compost Bin ,
    Computer Desk ,
    Containers ,
    Cradle Projects ,
    Small Crafts ,
    Cutting Board ,
    Deck Plans ..

    ReplyDelete
  41. DIY Smart Saw and DIY Magic Machine
    DOWNLOAD eBook https://tinyurl.com/diymagicmachine2018

    ReplyDelete
  42. that he had been saving one for his own use but that he would be willing to give it up for this job. Having known Dave for twenty years I was sure it would be something special. Acid Stained Concrete

    ReplyDelete
  43. Wow…outstanding service and products to meet our office needs. I Love all and the colors you choose are perfect. I want this furniture for my new house. Thanks a lot for sharing
    Traditional Wooden Cot

    ReplyDelete
  44. This comment has been removed by the author.

    ReplyDelete
  45. Thats amazing mat for floor. i was looking for my chair.
    floorchair.org is good site to buy?

    ReplyDelete
  46. love it!! I must admit that you're really good at this! First off, cheers for your great works! I was thinking if you experienced lots of cock ups when you were a beginner in writings, I would like to know if how you overcome it and become like this now. I want to share with you this carpet shampooing singapore maybe you need it one day.

    ReplyDelete
  47. Yo!I remember my best friend to your work because you have one idea, I don’t know if I just miss him but when I read your writings, it reminds me of my very best friend. Can I ask if we can be best friend someday I really love to read and talk with you everyday. And I hope that we go together do carpet cleaning .

    ReplyDelete

  48. I must admit that you're really good at this! First off, cheers for your great works! I was thinking if you experienced lots of cock ups when you were a beginner in writings and also I want to share with you this carpet shampooing service maybe you need it one day.

    ReplyDelete
  49. Pretty nice post. I just stumbled upon your weblog and wanted to say that I have really enjoyed browsing your blog posts. After all I’ll be subscribing to your feed and I hope you write again soon! best office chair under 100

    ReplyDelete
  50. Halo,I'm Helena Julio from Ecuador,I want to talk good about Le_Meridian Funding Service on this topic.Le_Meridian Funding Service gives me financial support when all bank in my city turned down my request to grant me a loan of 500,000.00 USD, I tried all i could to get a loan from my banks here in Ecuador but they all turned me down because my credit was low but with god grace I came to know about Le_Meridian so I decided to give a try to apply for the loan. with God willing they grant me  loan of 500,000.00 USD the loan request that my banks here in Ecuador has turned me down for, it was really awesome doing business with them and my business is going well now. Here is Le_Meridian Funding Investment Email/WhatsApp Contact if you wish to apply loan from them.Email:lfdsloans@lemeridianfds.com / lfdsloans@outlook.comWhatsApp Contact:+1-989-394-3740.

    ReplyDelete
  51. I just did mine. It took longer to check out of Lowes than it took to put it together. $50 bucks instead of 2x$85 at office depot. I needed 8x4 size.

    ReplyDelete
  52. Awesome article! It is in detail and well formatted that i enjoyed reading. which in turn helped me to get new information from your blog. my Vlog: Best Chair Mat 2021

    ReplyDelete
  53. Lovely great post. I fair faltered upon your web journal and needed to say that I have truly delighted in perusing your web journal posts. Anyway, I'll be subscribing to your nourish and I trust you post once more before long. Enormous much obliged for the valuable information. Pelican Paint

    ReplyDelete
  54. A nicely decorated house creates an impression. It also carries the personality of the owner. We have a unique color sample for your house at a low price. Do visit our websiteExterior house Painters near me New Orleans

    ReplyDelete
  55. If you have kids or grandparents at home and searching for anti slip mats, choose classic marble design ray vinyl mat from V-MAT. This durable mat has an anti-slip surface that improves safety.

    ReplyDelete
  56. This comment has been removed by the author.

    ReplyDelete
  57. Just made this today, and it worked amazingly well! I followed the steps for the most part, I use a 1/4 plywood underlayment, and 1 case of peel & stick vinyl flooring, and it cost me a total including tax of about $56!

    https://ibb.co/JnQdWrb

    ReplyDelete
  58. Traditional office chair mats often lack personality and can be expensive. Our DIY project aims to offer a budget-friendly and visually appealing alternative that not only protects your floor but also adds a touch of rustic charm to your office space.
    dui lawyer southampton va

    ReplyDelete
  59. Multiwood's Luxury Office Furniture is a game-changer! The elegance and sophistication it adds to my workspace are unparalleled.

    ReplyDelete
  60. Thank you so much for sharing all this wonderful information. It is so appreciated.
    Coir Door Mats

    ReplyDelete
  61. Nice articles and your information valuable and good articles thank for the sharing information office chair

    ReplyDelete
  62. What a fantastic DIY project! This wooden office chair mat is not only functional but also adds a lovely touch to any workspace. Visit our Website ISO Certification In Philippines

    ReplyDelete
  63. Nice articles and your information valuable and good articles thank for the sharing information executive chair

    ReplyDelete

Compliments and Frugal Tips Only, Please!